Eigendlich hatte ich mir meinen ersten Thread hier anders vogestellt.
Irgendwie positiver,aber es kommt ja meist alles anders als man denkt.
Nun gut,zu meinem Problem:
***Adapter Desc: 3Com EtherLink PCI
***MAC address: 00:26:54:0C:06:E3 Local IP: 192.168.0.1 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
----------------------------------------------------------------
From: 00:26:54:0C:06:E3 - To: FF:FF:FF:FF:FF:FF
ARP_REQUEST
----------------------------------------------------------------
From: 00:26:54:0C:06:E3 - To: FF:FF:FF:FF:FF:FF
ARP_REQUEST
----------------------------------------------------------------
From: 00:26:54:0C:06:E3 - To: FF:FF:FF:FF:FF:FF
ARP_REQUEST
BootP> Request from 00:50:9C:31:C8:48 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\minflsh\kernel\os"...
TFTP> Transfer finished, sent 2444 blocks
RARP> Answer sent to 00:50:9C:31:C8:48 with DBox-IP: 192.168.0.3
RARP> Answer sent to 00:50:9C:31:C8:48 with DBox-IP: 192.168.0.3
1 - mountd: mount: path: C/minflsh/
soweit so gut aber wenn ich nun versuche den Schreibschutz zu brücken kommt leider immer das dabei heraus:
DebugEnabler (c) tmbinc, gillem +(sagem/13,amd,philips) 1.8beta
bl-version : 1.2
product? at : 10000904
current state : locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : 000000AA - FAILED!!!
Please reset now!
Habe brav nach dem HowTo von Dietmar beide Möglichkeiten des überbrückens versucht,aber nun weiss ich leider nicht mehr weiter.
Hier noch als Anhang die auagabe über RSH:
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
> umount /
> mount 192.168.0.1:C/minflsh/ /
C_INIT: mount 192.168.0.1:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 20 sec, 630000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 24 sec, 480000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 27 sec, 380000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 29 sec, 980000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 32 sec, 600000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 35 sec, 200000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 37 sec, 800000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 40 sec, 400000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 43 sec, 0 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 45 sec, 600000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 49 sec, 100000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Command timed out - didn't get answer from DBox!
! Execution stopped!
Habe auch schon die Suchfunktion hier im Forum genutzt,habe aber leider nicht das richtige gefunden.
Vielicht liegt es ja am BL(1.2)???
Danke schonmal im vorraus.
Gruss
Festus
.
