Aber nicht genug
Habe eine Sagem Box mit 2 Intel habe die MHC Methode angewendet.
Habe den Schreibschutz gelöst (hoffe ich mal)
und bekomm jetzt immer diese Meldung beim flashen
> help
ChorusOS r3 rsh daemon - valid commands are:
mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
/lost+found: not currently mounted
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> umount /
> mount 192.168.5.7:c/miniflsh/ /
C_INIT: mount 192.168.5.7:c/miniflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 10
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 248 sec, 570000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 252 sec, 430000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 255 sec, 660000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 258 sec, 70000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 260 sec, 870000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 263 sec, 270000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 266 sec, 70000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 268 sec, 470000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 271 sec, 270000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 273 sec, 670000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 277 sec, 370000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Command timed out - didn't get answer from DBox!
! Execution stopped!
Okay da stimmt was nicht.
Aber jetzt das was mich absolut verwirrt
Wenn ich meine Box neu Starte kommt dieses Bild
http://www.dietmar-h.net/img/debug.jpg
Nur das bei mir am Ende im gelben rand anstatt ein strich noch LADE.... dran steht.
THX for Help
Greats
Hando
Die Aktualisierung läuft noch, hoffentlich ist danach noch eienr von euch da 
schon neues Image drauf gespielt..
