NeutrinoHD auf der Triple Dragon

[dietmarw]

montag mittag noch nich

edit: ne testversion liegt jetzt auf den download mirrors..

[singlebytes]

Cool dietmarw

[singlebytes]

Hi NeutrinoHD are very good.

But is need to make some changes:

On mnt for record, epg, audio/video, you must add folder because don't exist.

/media/sda1/%

And can't be changed by yWeb by defult.

For now is my report.

[seife]

TS abspielen funktioniert jetzt prinzipiell (keine Sprünge, vor und zurückspulen etc).
MPEG / VDR funktioniert vermutlich noch nicht (nicht probiert)

[singlebytes]

Hi, just send to yWeb Team the Portuguese translation, based on Eng. Version you have it.

CU

Where I can find a How To add Strings to be translate on yWeb

[seife]

so, springen in TS-Files sollte jetzt auch gehen.

singlebytes: send the translations upstream, I'm not forking the project here.

[MPC823]

Ja geht nun (mit den doppelpfeiltasten unter der Menütaste und der Exit taste. Alledings habe ich schon nach kurzer zeit das die "timeline" nicht mehr da war und im normalen Menü haben auch von der Infobar ein paar anzeigedaten gefehlt. Könnte es sein das es daran liegt das ich nur die neugebauten "neutrion" upgedatet habe . muss noch mal probieren .


Gruss Martin und Danke

[garion]

Hi,
A big thank you for the work seife.
Today I Neutrino-HD compiled and installed on the HDD.
Works perfectly.

[hannebamb(el)]

Hi seife,

wollte gerade mal Feedback geben, bin erst jetzt wieder zum Testen gekommen:
Timeshift auf der Triple funktioniert grundsätzlich,
man muss zwar 2-3 mal Pause drücken, aber dann läuft es und lässt sich dann auch prima fortsetzen.
Goil

[dbt]

Mal 'ne ganz vorsichtige Frage: Ist die TripleDragon überhaupt ein HD-Receiver?

[dietmarw]

Mal 'ne ganz vorsichtige Frage: Ist die TripleDragon überhaupt ein HD-Receiver?

nein, da geht es nur um die "internen strukturen" des neutrino hd (z.b. timeshift), hd selber wird da nicht genutzt.

[hannebamb(el)]

Hi,

ohne einen flamewar starten zu wollen:
die Hardware entspricht ungefähr der Dream 7000. Der Tuner ist empfindlicher, das Netzteil besser ausgelegt, das Netzwerk ist wirklich 100MBit tauglich, ...
Ansonsten könnte man das Neutrino-HD auch auf eine Dream portieren (so wie seife in einem seiner Posts schrieb auf Basis seiner libtriple recht einfach)


Die Anschlüsse für DVI/HDMI sind auf dem Mainboard der Triple Dragon drauf, Knäcke kann da mehr zu sagen.
DVB-S2 hat es nicht, und somit auch nichts >MPEG2

[dietmarw]

baut bei mir seit einiger zeit wegen problemen in der libdvbsub nicht..
geht das bei euch?

[Striper]

Zeig mal die Fehlermeldung. Aber ich kann mir denken das mein "Fix" für die CS auch hier hilft.

[dietmarw]

Code: Alles auswählen

Making all in libdvbsub
make[4]: Entering directory `/home/dietmarw/tripledragonHD/TDHD_make/mainline/build_tmp/neutrino-hd/lib/libdvbsub'
powerpc-405-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub -I../.. -I/home/
dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/src/zapit/include -I/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino
-hd-tripledragon/src  -I/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libtriple -fno-rtti -fno-exceptions   -Wall -W -Ws
hadow -g -O2 -I/home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include -I/home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/hardware -I/home/d
ietmarw/tripledragonHD/TDHD_make/mainline/root/include/freetype2 -D_FILE_OFFSET_BITS=64 -DUSE_SPACE_EFFICIENTLY -MT dvbsub.o -MD -MP -MF .deps/dvbsub.Tpo -c -o
 dvbsub.o /home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsub.cpp
In file included from /home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavutil/avutil.h:81,
                 from /home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavcodec/avcodec.h:30,
                 from /home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavformat/avformat.h:56,
                 from /home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsubtitle.h:20,
                 from /home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsub.cpp:18:
/home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavutil/common.h: In function `int32_t av_clipl_int32(int64_t)':
/home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavutil/common.h:154: error: `UINT64_C' was not declared in this scope
/home/dietmarw/tripledragonHD/TDHD_make/mainline/root/include/libavutil/common.h:154: warning: unused variable 'UINT64_C'
/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsub.cpp: In function `int dvbsub_close()':
/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsub.cpp:174: warning: converting to non-pointer type `pthread
_t' from NULL
/home/dietmarw/tripledragonHD/TDHD_make/mainline/source/neutrino-hd-tripledragon/lib/libdvbsub/dvbsub.cpp:184: warning: converting to non-pointer type `pthread
_t' from NULL
make[4]: *** [dvbsub.o] Error 1
make[4]: Leaving directory `/home/dietmarw/tripledragonHD/TDHD_make/mainline/build_tmp/neutrino-hd/lib/libdvbsub'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/dietmarw/tripledragonHD/TDHD_make/mainline/build_tmp/neutrino-hd/lib'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/dietmarw/tripledragonHD/TDHD_make/mainline/build_tmp/neutrino-hd'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/dietmarw/tripledragonHD/TDHD_make/mainline/build_tmp/neutrino-hd'
make: *** [/home/dietmarw/tripledragonHD/TDHD_make/mainline/deps/neutrino-hd] Error 2

[Striper]

Sollte auch hier gehen:

Code: Alles auswählen

--- tmp/27huYa_system-libs.mk	2010-05-08 17:45:43.550749978 +0200
+++ home/tosu/development/td-buildscripts/make/system-libs.mk	2010-05-08 17:45:37.894748865 +0200
@@ -231,7 +231,7 @@
 
 # maybe put this into archive.mk?
 $(BUILD_TMP)/ffmpeg:
-	svn checkout svn://svn.ffmpeg.org/ffmpeg/trunk $(BUILD_TMP)/ffmpeg
+	svn checkout -r 22733 svn://svn.ffmpeg.org/ffmpeg/trunk $(BUILD_TMP)/ffmpeg
 	cd $(BUILD_TMP)/ffmpeg && $(PATCH)/ffmpeg-dvbsubs.diff
 
 $(DEPDIR)/ffmpeg: $(BUILD_TMP)/ffmpeg | $(TARGETPREFIX)

[dietmarw]

jo, sieht gut aus.. thx..

[prodigy7]

Moin!

Das Bauen schlägt bei mir momentan fehl:

Code: Alles auswählen

mp_captab.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/comp_error.c -o ../obj_s/comp_error.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/comp_expand.c -o ../obj_s/comp_expand.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/comp_hash.c -o ../obj_s/comp_hash.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/comp_parse.c -o ../obj_s/comp_parse.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/comp_scan.c -o ../obj_s/comp_scan.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/db_iterator.c -o ../obj_s/db_iterator.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/./tinfo/doalloc.c -o ../obj_s/doalloc.o
powerpc-405-linux-gnu-gcc -DHAVE_CONFIG_H -I../ncurses -I. -I. -I../include  -D_GNU_SOURCE -DNDEBUG -W -Wall -pipe -O2 -g -I/public/Development/TripleDragon/mainline/root/include -I/public/Development/TripleDragon/mainline/root/include/hardware -mcpu=405 -msoft-float -fPIC -c ../ncurses/fallback.c -o ../obj_s/fallback.o
../ncurses/fallback.c:17: error: syntax error before ',' token
make[2]: *** [../obj_s/fallback.o] Fehler 1
make[2]: Leaving directory `/public/Development/TripleDragon/mainline/build_tmp/ncurses-5.6/ncurses'
make[1]: *** [libs] Fehler 2
make[1]: Leaving directory `/public/Development/TripleDragon/mainline/build_tmp/ncurses-5.6'
make: *** [/public/Development/TripleDragon/mainline/deps/libncurses] Fehler 2

Ausgeführtes make war

Code: Alles auswählen

make neutrino-hd-system

Edit(h): Scheint so, als ob da nicht sauber auskommentiert wurde:

Code: Alles auswählen

/* fallback entries for: linux vt100 xterm */
/* linux */
/* vt100 */
/* xterm */
static const TERMTYPE fallbacks[3] =
{
 /* linux */
, /* vt100 */
, /* xterm */
};

Ist das für irgendwas wichtig? Kann man die , einfach raushauen?

[seife]

ncurses-devel installieren.

[prodigy7]

Hmmm ... aber der Syntax, wie die möglichen Terminaltypen auskommentiert sind, ist doch völlig falsch oder? Genau genommen, wenn man die Kommentierungen entfernt, kommt das hier raus:

Code: Alles auswählen

static const TERMTYPE fallbacks[3] =
{

,
,
};

Oder ist die Auskommentierung nur ein Resultat irgendeiner Abfrage, die merkt, das kein ncurses-devel installiert ist?

[seife]

will haben timeshift

Martin

Eigentlich sollte das jetzt ziemlich gehen. Ich habe aber immer wieder Artefakte drin. Momentan schiebe ich das darauf, dass ich das auf einen NFS-Mount mache, was sicher nicht optimal ist. User mit Platte können das mal ausprobieren.

Man sollte jetzt auch schnell vorspulen können, auch wenn manchmal dabei das Bild stehen bleibt (Pause und wieder Starten macht dann wieder Bild).

Schneller Rücklauf geht noch nicht, da muss ich noch ein wenig hirnen... Momentan schaltet ein Druck auf die "<<" Taste wieder auf "speed = 1", also normalen Play modus.

(Schnell spulen habe ich nur mit TS-Wiedergabe getestet, nicht mit Timeshift. Aber eigentlich sollte das dort auch gehen).

[prodigy7]

Kam jetzt endlich mal dazu, von Anfang bis Ende NeutrinoHD durchzubauen. Was mir aufgefallen ist: In /dev sind keine devices für Festplatten angelegt, weshalb fdisk & co. ins leere laufen. Nach Copy & Paste der Liste auf http://www.xs4all.nl/~lennartb/installdisk/node8.html klappts dann auch.

[seife]

der TD-Kernel benutzt devfs.

Code: Alles auswählen

/dev/shm/root # find /dev/discs/disc*/
/dev/discs/disc0/
/dev/discs/disc0/disc
/dev/discs/disc0/part1
/dev/discs/disc0/part2
/dev/discs/disc0/part3
/dev/discs/disc1/
/dev/discs/disc1/disc
/dev/discs/disc1/part1
/dev/discs/disc1/part2

[vulcaneanu71]

Hello everybody!
I tried to install td_hd_neutrino_20120220 .bz2 on the second partition "sda2" (system partition 1) of HDD.
But the receiver locks itself on startup ...
I followed the steps:

First of all I installed the hdd in the correct way.
1) Go to osd menu-->system setup --> more system setup --> harddisk--> install --> initialise HDD -->now.... for to partinion the HDD;

2) Download td_hd_neutrino_20120220.tar.bz2 ( http://tuxbox.trale.de/ )

3) Clear the /mnt/hd/data directory.(telnet- "rm -rf /mnt/hd/data/*")

4) Upload td_hd_neutrino_20120220.tar.bz2 to /mnt/hd/data

5) Un-tar the archive...
cd /mnt/hd/data
tar -zxvf td_hd_neutrino_20120220.tar.bz2

6) Reboot and go into Bootmenu

7) Change Kernel Commandline to option 3. Save settings and reboot...

When starting up the receiver, based on the help of the PuTTY (--> COM1-->serial-->speed 115200), I receive the following message on the PC :


/ (C) MNC Ltd. Set-Top-Box \
\ BIOS 3.29 (2005/11/07) /
-------------------------------
\ .--. Serialnumber: Tripledragon-EU-0-170327161-S
|o_o | PowerPC at : 252 MHz, EBIU: 63 MHz, PVR: 41810952, VDEV: 0B
|:_/ | RAM config : B0: 2x32=64 MB, B1: 2x8=16 MB, [80 MB]
// \ \ Flash memory: Size: 8 MB, Manufacturer: 04, Type: 22D7
(| | ) Tunertype : DVB-S, Sat-Tuner BS2F7VZ0184
/'\_ _/`\ Ethernet : Chip 33, Revis. 91 (SMC91C11x)
\___)=(___/ Network : not initialised yet
Ethernet MAC: BADDAD26FC79, TD IP: 192.168.1.123, Host IP: 192.168.1.1
F-System: 0xFF9C0000, 0x480000 (4718592 Byte), VAR: 1769472 Byte / 27 sect
Kernel : 0xFFE40000, 0x197A00 (1669632 Byte / 26 sect), autostart
Main Bios-Menu
0 - Boot
R - Reset
S - Save config

B - Boot/Kernel Setup
E - Upgrade/Flash/Network
H - Hardware Setup
L - Loader Config
V - Video/Modulator Setup
->

loaded at: 00500000 00698178
relocated to: 00400000 00598178
board data at: 00596124 00596178
relocated to: 0040515C 004051B0
zimage at: 004058B1 00595D07
avail ram: 00599000 04000000

Linux/PPC load: console=ttyS1,115200 root=/dev/ide/host0/bus0/target0/lun0/part2 rw mtdparts=phys_mapped_flash:64k(conf),1728k(var),4718592(filesystem),1703936(kernel),128k(ppcboot)ro
Uncompressing Linux....
Now booting the kernel (misc-embedded)
Linux version 2.6.12 (flow@flownix) (gcc version 3.4.1) #396 Tue Oct 4 23:22:10 CEST 2005

machine: TRIPLEDRAGON STB
bi_s_version (bd_t struct's version) : 1.7
bi_r_version (bios/bootloader version): 3.29

bi_memsize : 0x04000000 (65)MBytes
bi_memsize1: 0x01000000 (16)MBytes
bi_enetaddr: ba:dd:ad:26:fc:79
bi_intfreq (CPU speed) : 0x0f053700 (252)Mhz
bi_busfreq (PLB clock) : 0x03c14dc0 (63)MHz
bi_tbfreq (SW timebase): 0x019bfcc0 (27)MHz
bi_opb_busfreq : 0x03c14dc0 (63)MHz
bi_iic_fast enable : [0] 0, [1] 0
flash_base : 0xff800000

MNC Ltd. DBx3000
http://www.mncltd.com
Built 1 zonelists
Kernel command line: console=ttyS1,115200 root=/dev/ide/host0/bus0/target0/lun0/part2 rw mtdparts=phys_mapped_flash:64k(conf),1728k(var),4718592(filesystem),1703936(kernel),128k(ppcboot)ro
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61312k available (2724k kernel code, 724k data, 88k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Squashfs 2.2 includes LZMA decompression support
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
SGI XFS with no debug enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 31) is a 16550A
io scheduler noop registered
io scheduler deadline registered
loop: loaded (max 8 devices)
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at c5056300 IRQ 28
eth0: Ethernet addr: ba:dd:ad:26:fc:79
eth0: PHY LAN83C183 (LAN91C111 Internal)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
5 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00010000 : "conf"
0x00010000-0x001c0000 : "var"
0x001c0000-0x00640000 : "filesystem"
0x00640000-0x007e0000 : "kernel"
0x007e0000-0x00800000 : "ppcboot"
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
IBM IIC driver v3.1
ibm-iic0: using standard (100 kHz) mode
ibm-iic1: using standard (100 kHz) mode
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
STB04500 OCP IDE 2.74 - Built Oct 3 2005/12:18:01 for 2.6.12 (none debug)
hda: WDC WD1200JB-00REA0, ATA DISK drive
ide0 at 0xc505c1f8-0xc505c1ff,0xc505c1f6 on irq 25
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 234435439 sectors (120030 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 88k init
init started: BusyBox v1.18.4 (tripledragon)
/etc/init.d/rcS: line 20: ldconfig: not found
starting /etc/init.d/S01mount ...
root FS is mounted rw, skipping filesystem check
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... eth0: link down
udhcpc (v1.18.4) started
Sending discover...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Sending discover...
Sending select for 192.168.1.163...
Lease of 192.168.1.163 obtained, lease time 43200
Starting ifplugd... .
starting /etc/init.d/S52syslogd ...
Jan 1 01:00:33 tripledragon syslog.info syslogd started: BusyBox v1.18.4
starting /etc/init.d/S54inetd ...
starting /etc/init.d/S55loadmodules ...
STB04500 TDCORE 2.07 - Built Oct 28 2005/14:57:11 for 2.6.12 (none debug)
tdav: no version for "os_call_irq_task" found: kernel tainted.
STB04500 TDAV 1.48 - Built Nov 16 2005/19:31:49 for 2.6.12 (none debug)
STB04500 TDPANEL 1.20 - Built Oct 28 2005/14:57:25 for 2.6.12 (none debug)
STB04500 TDTUNER 2.14 - Built Oct 28 2005/14:57:40 for 2.6.12 (none debug)
STB04500 TDCA 1.18 - Built Oct 28 2005/14:57:27 for 2.6.12 (none debug)
STB04500 TDCI 1.42 - Built Oct 28 2005/14:57:31 for 2.6.12 (none debug)
STB04500 TDGFX 1.40 - Built Oct 28 2005/14:57:35 for 2.6.12 (none debug)
STB04500 TDOSS 1.28 - Built Oct 28 2005/14:57:20 for 2.6.12 (none debug)
Jan 1 00:00:34 tripledragon daemon.info init: starting pid 283, tty '': '/etc/init.d/start'

Please press Enter to activate this console. [neutrino] frameBuffer Instance created
libtriple debug options can be set by exporting TRIPLE_DEBUG.
The following values (or bitwise OR combinations) are valid:
component: audio 0x01
component: video 0x02
component: demux 0x04
component: play 0x08
component: power 0x10
component: init 0x20
component: ca 0x40
component: record 0x80
all components: 0xff
[LT:00000000:init ] init_td_api begin, initialized=0, debug=0x00
DFB input converter thread starting...
modprobe: module uinput not found in modules.dep
modprobe: module evdev not found in modules.dep
DFB input thread: unable to open /dev/misc/uinput (No such file or directory)


Where am I wrong?

Please give details about my mistake!

Thanks!

[seife]

uinput and evdev are in addon-drivers.opk:

Code: Alles auswählen

td3:~ # opkg-cl  search /lib/modules/2.6.12/kernel/drivers/input/evdev.ko 
addon-drivers - 2.6.12-3
td3:~ # opkg-cl  search /lib/modules/2.6.12/kernel/drivers/input/misc/uinput.ko 
addon-drivers - 2.6.12-3

So either a dependency is missing (but I don't think so) or something is wrong with your addon-drivers pkg build.

Please show the output of

opkg-cl files addon-drivers

on the box.